Specifications; Hardware Specifications; Dimensions And Weights; Component Dimensions - HP Integrity rx1620 Operation Manual

5 Specifications

This chapter provides the power requirements, physical requirements, and hardware specifications
required for normal operation of the HP Integrity rx1620.
NOTE:
For information on operating conditions (environmental requirements), see the hp
Integrity rx1620 Site Preparation Guide included on the HP Server Documentation CD-ROM, or
posted under the rx1620 Server at http://docs.hp.com.

Hardware Specifications

Table 5-1 Hardware Specifications
Micro-processors
Memory
SCSI
LAN
PCI Slots
Core I/O
DVD-ROM
Mass Storage
External Storage
Power Supply

Dimensions and Weights

This section provides dimensions and weights of hp Integrity rx1620 Server components.

Component Dimensions

Table 5-2 Server Component Dimensions
Dimension
Height-Inches (Centimeters)
Width-Inches (Centimeters)
Depth-Inches (Centimeters)
Weight-Pounds (Kilograms)
Intel Itanium (up to 2 processors). 1.3 GHz 3 MB, 1.5 GHz 3 MB.
Supports up to eight Double Data Rate (DDR) registered ECC Memory, in PC1600 DIMMs.
Supported DDR DIMM sizes: 128MB, 256MB, 513MB, 1GB, and 2GB. Requires DIMMs to
be added in pairs of equal capacity.
Integrated Ultra-3 SCSI dual channel controller; 80 MB/s transfer rate with one internal
68-pin connector (channel A) and one external 68-pin connector (channel B).
Two 10Mb/100Mb/1Gb LAN (RJ-45) fast ethernet controller; with Wake-on-LAN
enabled/disabled via BIOS setup.
Two 64-bit PCI-X slots, 133 MHz, 3.3V slots. One full slot and one half slot.
One serial port, 2 USB 2.0 ports, 2 PCI-X slots, 2 SCSI channels and 1 IDE bus.
IDE interface; 48x speed.
Maximum internal storage: two 146GB, 10K RPM drives.
Optional.
460W power supply.
Value
1.75 (4.5)
17 (43)
21.5 (54.6)
Unloaded 26 (9.7)
Fully loaded <32(13.4)

Hardware Specifications

99