Certificate Generate; Console Log; Command Mode; Console - HP Integrity rx1620 Operation Manual

• TRANSMIT CONFIGURATION STRINGS: Disable this setting whenever the modem being
used is not compatible with the supported modem (MT5634ZBA).
• MODEM PRESENCE: When the modem may not always be connected, set this parameter
to "not always connected".
For example: A modem attached through a switch. In mode "not always connected," no
dial-out functions are allowed: DIAL-BACK is disabled, and PAGING is not possible.
The MP mirrors the system console to the MP local, remote/modem, and LAN ports. One console
output stream is reflected to all of the connected console users. If several different terminal types
are used simultaneously by the users, some users may see strange results.
Example 3-19 HP-UX
Applications that care about the terminal type (install, SAM, vi, and so on) running on HP-UX
use three methods to determine the terminal type:
1. The application takes the terminal information from the OS. This value is set in the CA
command and takes effect for all MP ports.
2. The $TERM shell environment variable.
3. The application directly queries the terminal (in this case, the write enabled terminal
establishes the terminal type).
Make sure that settings #1 and #2 agree with your terminal type.

Certificate Generate

CG: Generate RSA key pair or Self Signed Certificate
This command generates a new RSA key pair and self signed certificate.

Console Log

CL: Console Log—view the history of the Console output
This command displays up to 60 Kilobytes of logged console data (about 60 pages of display in
text mode) sent from the system to the Console path.

Command Mode

CM: Command Mode—enter command mode
This command switches the console terminal from the MP Main Menu to mirrored command
interface mode. If the current mux authority is administrator and the new login is as an operator,
the command mux will be denied (remains in MP Main Menu mode). If a command is in progress,
a message will be displayed warning the new user of system status.

Console

CO: COnsole—leave command mode and enter console mode
This command switches the console terminal from the MP Main Menu to mirrored/redirected
console mode. All mirrored data is displayed. Type CTRL+B to return to the MP command
interface.
For VT100 and HPTERM, verify that the MP setting in the CA command is correct and all mirrored
consoles are of the same terminal type for proper operation.

Connect to Service Processor

CSP: Connect to remote management processor over the LAN
64 Utilities