Table 4-23 1Gb LAN B Connector LEDs
Link LED
Activity
Link w/no activity
No link
Optional Management Processor LAN C Connector LEDs
The optional 10/100Mb LAN C interface provides four LEDs on the rear panel if the management
processor card is installed:
Table 4-24 Optional Management Processor Card LAN C LEDs
LAN LED
Self-test
10BT
100BT
Standby
Power
System Board Diagnostic LEDs
There are three additional LEDs that can help when troubleshooting the system. These LEDs are
located on the system board close to the back of the system and can be viewed through the small
cooling holes in the system case.
Location
Top
2nd from top
2nd from bottom
Bottom
Output
Blinking Orange
Solid Orange
Off
Color
Yellow
Off
Green
Blinking green
Off
Green
Blinking green
Off
Green
Off
State
Management processor running
selftest or error
Management processor has booted
10BT link established
10BT activity
No link or 100BT link
100BT link established
100BT activity
No link or 10BT link
Standby power on
Standby power off
System Board Diagnostic LEDs
91
Need help?
Do you have a question about the Integrity rx1620 and is the answer not in the manual?