Interacting With The Management Processor; Management Processor Command Interface; Mp Welcome Screen; Management Processor Help System - HP Integrity rx1620 Operation Manual

Interacting with the Management Processor

To interact with the management processor, perform the following steps:
1. Log in using your management processor user account name and password.
NOTE:
to access the MP Main Menu and the management processor (MP) prompt.
2. Use the management processor menus and commands as needed. A list of available
commands can be displayed by using the management processor help function (in the MP
Main Menu, enter HE followed by LI at the MP HELP: prompt). Log out using the X
command (in the MP Main Menu, enter X at the MP> prompt) when done.

Management Processor Command Interface

Use the management processor menus and commands as needed. The login screen, which includes
the Main Menu, is shown below. Main Menu commands (CO, VFP, CM, CL, CSP, SE, SL, HE, and
X) can be entered after the MP prompt. Commands not displayed in the MP Main Menu can be
accessed in command mode by first using the CM command at the MP prompt. (A list of available
commands can be displayed by using the management processor help function. Display the list
of commands as follows: in the MP Main Menu, enter HE after the MP> prompt, then enter LI
after the MP HELP: prompt.) You can return to the MP Main Menu by typing CTRL+B.
NOTE:
At publication, the current version of the Management Processor Revision is E.02.25.
Check the HP website for the latest revision.

MP Welcome Screen

MP Welcome screen commands:
MP Login: Admin
MP password: *****
Hewlett-Packard Management Processor
(C) Copyright Hewlett-Packard Company 1999-2003. All rights reserved
System Name: xxxxxxxxx
MP MAIN MENU:
CO: Console
VFP: Virtual Front Panel
CM: Command Menu
CL: Console Log
SL: Show Event Logs
CSP: Connect to Service Processor
SE: Create OS Session
HE: Main Menu Help
X: Exit Connecion

Management Processor Help System

The MP has a robust help system. To invoke MP HELP, enter he after the MP> prompt. The
following is displayed:
HE
==== MP Help: Main Menu ============================================(Administrator)===
Hardware Revision a1 Firmware Revision E.02.20 May 30 2003,15:18:47
If the management processor is not displaying the MP Main Menu, use CTRL+B
MP Help System
Management Processor Command Interface 61