Security Options; System Status; Firmware Revision Status; Alert Levels - HP Integrity rx1620 Operation Manual

Table 3-8 defines alert (or severity) levels.
Table 3-8 Alert Levels
Severity

Security Options

SO: Configure security options and access control (users, passwords, and so on)
This command modifies the security parameters of the MP, which include login time-outs and
allowed password faults.
If configured, when you access the MP via the modem port, the MP hangs up and dials the user
back. This does not work if Modem Presence is set to not always connected with the CA
command.
If the mode is Single, the State is changed todisabledafter the first login.
A disabled user's login is not accepted.

System Status

SS: Displays the status of the system processors
The SS command displays the status of the system processors and which processor is the monarch.

Firmware Revision Status

SYSREV: Displays the revision status of firmware in the system.
This command displays the revision status of firmware in the system.
Definition
0 Minor forward progress
1 Major forward progress
2 Informational
3 Warning
5 Critical
7 Fatal
Management Processor Command Interface 69