Syntax; Parameters; Cpuconfig; Boottest Command - HP Integrity rx1620 Operation Manual

Syntax

boottest
boottest on
boottest off
boottest [test]
boottest [test] [on|off]

Parameters

[test] Each test can be set or cleared:
booting_valid
early_cpu
late_cpu
platform
chipset
io_hw
mem_init
mem_test
Example 3-5 boottest Command
Shell> boottest
BOOTTEST Settings Default Variable
Selftest
-------------
booting_valid
early_cpu
late_cpu
platform
chipset
io_hw
mem_init
mem_test
Example 3-6 boottest early_cpu off Command
Shell> boottest early_cpu off
BOOTTEST Settings Default Variable
Selftest
-------------
booting_valid
early_cpu
late_cpu
platform
chipset
io_hw
mem_init
mem_test

cpuconfig

Displays the config/deconfig state of processors in the system and allows the user to configure
or reconfigure processors.
Syntax
cpuconfig <cpu> <on|off>
Parameters
<cpu>
<on|off>
Displays status of all speedy boot bits
Run all tests (for a normal boot time)
Skip all tests (for a faster boot time)
Displays status of specific Speedy Boot bit
Sets or clears a specific Speedy Boot bit
Enable/disable system firmware response to BOOTING
bit. If OS Speedy Boot aware set to on.
Enable/disable early CPU selftests.
Enable/disable late CPU selftests.
Enable/disable system board hardware tests.
Enable/disable CEC tests.
Enable/disable EFI driver Core I/O tests.
Enable/disable memory initialization.
Enable/disable full destructive memory tests.
Setting
-------------------------
On (OS speedy boot aware)
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
Setting
-------------------------
On (OS speedy boot aware)
Skip this test
Run this test
Run this test
Run this test
Run this test
Run this test
Run this test
specify a processor
state to set the processor to
EFI/POSSE Commands 35