Display System Id; Inactivity Timeout; Configure Lan Console; Locator Led Status - HP Integrity rx1620 Operation Manual

and those commands displayed in the MP Main Menu, will be displayed. If executed in command
mode, this command displays a list of command interface commands available to the user. It
also displays detailed help information in response to a topic or command at the help prompt.

Display System ID

ID: Display/modify system information
This command allows the user to display and modify the following:
• SNMP contact information
• SNMP server information
• SPU hostname

Inactivity Timeout

IT: Inactivity Timeout settings
The session inactivity timeout is up to 1,440 minutes—default is 60 minutes. This timeout prevents
sessions to the system from being inadvertently left open. A session can be started by the SE
command. An open session can prevent users from logging onto the MP through a port and can
also prevent system applications from initiating an outbound connection.
MP inactivity timeout is up to 1,440 minutes—default is 5 minutes. This timeout prevents a user
from inadvertently keeping the MP locked in a MP Command Interface mode preventing other
users from looking at the console output. The MP Command Interface inactivity. timeout may
not be deactivated.
Flow control timeout is 0 to 60 minutes. If set to 0, no timeout is applied. This timeout prevents
mirrored flow control from blocking other ports when inactive.

Configure LAN Console

LC: LAN configuration (IP address, and so on)
This command displays and allows modification of the LAN configuration. Configurable
parameters include:
• MP IP Address
• MP Host Name
• Subnet Mask
• Gateway Address
• Web Console port number
• Link State
The MP Host Name set in this command is displayed at the MP command interface prompt.
Typically the DNS name for the LAN IP is entered.
This field can be programmed to any useful name or phrase. For clarity, it is useful to enter
MP-on-SYSTEM as the MP Host name, so both names show up in the prompt (limit 19 characters,
no spaces allowed.) The web access port number is also set by this command.

Locator LED Status

LOC: Locator LED Status
This command displays the current status of the Locator LED.

LAN Status

LS: LAN Status
This command displays all parameters and the current status of the MP LAN connections. The
LAN parameters are not modified by the execution of this command.
66 Utilities