Add Command - HP TR3271 Programming Manual

ADD Command

The ADD command adds a subdevice to the TR3271 subsystem.
can add only a subdevice; this command is not valid for the PROC
or LINE object type.
summary state when you attempt to add a subdevice.
is not in one of these summary states, the TR3271 subsystem
returns an error.
command (without errors), the subdevice is placed in the STOPPED
summary state.
command.
When your management application issues the ADD command for
a subdevice, the subsystem checks the configurable attributes
provided in the command.
ZTR3-MAP-ADD-SU.
verifies that the subdevice is not already defined and that the
number of subdevices defined on the line is not greater than 253.
If either of these checks fails, the subsystem returns an error.
Typically, a line can support 255 subdevices, but there are two
subdevices reserved with the names #ZSPI and #DEBUG.
Command
ZCOM-CMD-ADD
Object Type
ZCOM-OBJ-SU
Tokens in Command Buffer
ZTR3-MAP-ADD-SU
def ZTR3-DDL-ADD-SU.
02 ZADDR
02 ZPROTO
02 ZRECSIZE
02 ZXPARENT
02 ZTYPE
end.
ZCOM-TKN-OBJNAME
ZCOM-MAP-REQID
The line must be in the STARTED or STOPPED
When the subsystem finishes processing the
To start the added subdevice, use the START
These attributes are defined in
If the attributes are valid, the subsystem
token-type ZSPI-TYP-STRING.
!MAP is optional, but if present,
!fields are required.
COMMANDS AND RESPONSES
type ZSPI-DDL-INT-PAIR. !{}
type ZSPI-DDL-ENUM.
type ZSPI-DDL-INT.
type ZSPI-DDL-BOOLEAN.
type ZSPI-DDL-INT-PAIR
ADD Command
You
If the line
!{}
!{}
!{}
!{}
!{}
>
6-13