Abort Command - HP TR3271 Programming Manual

COMMANDS AND RESPONSES

ABORT Command

ABORT Command
The ABORT command terminates the operation of the specified
object and clears any existing connection to the object.
the subsystem finishes processing the command, the specified
object is placed in the STOPPED summary state.
line or a subdevice, but not a process.
When you use the ABORT command, note that the termination is
done without regard to processing currently in progress for
the specified object.
object are halted, and files and listings might be left in an
inconsistent or incomplete state.
while the line is in the DIAG summary state, the TR3271 subsystem
returns an error.
When your management application issues the ABORT command for a
line, the subsystem checks for the optional subordinate-modifier
token.
If the value of the modifier is ZCOM-VAL-SUB-ONLY, only the
subdevices attached to the specified line are aborted.
If the value of the modifier is ZCOM-VAL-SUB-ALL, the subsys-
tem aborts all the associated subdevices and then aborts the
line.
If the value is ZCOM-VAL-SUB-NONE, or if the subordinate
modifier is not present, the subsystem checks the state of the
subordinate subdevices.
the STOPPED summary state.
the STARTED summary state, the TR3271 subsystem rejects the
command and returns an error.
When your management application issues the ABORT command for
a subdevice, the subsystem aborts only the specified subdevice.
The SU object has no subordinates.
application can specify the subordinate modifier with the value
ZCOM-VAL-SUB-NONE.
only the specified subdevice.
specifies the ZCOM-VAL-SUB-ONLY or ZCOM-VAL-SUB-ALL value, the
TR3271 subsystem returns an error.
If your management application needs to abort a pass-through
protocol (PTP) subdevice, it is recommended that you disconnect
the subdevice first to avoid losing data.
6-8
All activities being performed by the
If you issue this command
The subordinate subdevices must be in
If any of the subdevices are in
This value causes the subsystem to abort
If your management application
You can abort a
However, your management
When