Ztr3-Err-Su-Opened - HP TR3271 Programming Manual

ERROR NUMBERS AND ERROR LISTS
13:

ZTR3-ERR-SU-OPENED

13: ZTR3-ERR-SU-OPENED
The STOP command has been issued, but an SU is currently opened
by an application.
object has been specified with the subordinate modifier (ZCOM-
VAL-SUB-ONLY) or the SU object has been specified.
only to CRT subdevices.
ZSPI-TKN-ERRLIST
ZSPI-TKN-ERROR
ZCOM-TKN-OBJNAME
ZCOM-TKN-OBJTYPE
ZSPI-TKN-ENDLIST
Tokens
ZSPI-TKN-ERROR is the standard SPI error token described in the
Distributed Systems Management (DSM) Programming Manual .
value consists of the target subsystem ID and the error number
ZTR3-ERR-SU-OPENED.
list.
ZCOM-TKN-OBJNAME is the object name on which the error occurred
in the command.
presence is relevant to the cause of the error.
error was detected after the subsystem made choices based on the
object name, this token is present in the error list.
it is omitted from the list.
ZCOM-TKN-OBJTYPE is the object type provided with the command on
which the error occurred.
against which the command was issued.
Recommended Action
CLOSE the SU or issue the ABORT command.
command, files may be left in an inconsistent state.
A-14
This error is returned only when the LINE
This token is always present in the error
This token is present in the error list if its
Its value defines the type of object
type ZSPI-TYP-LIST
type ZSPI-TYP-ERROR
type ZSPI-TYP-STRING
type ZSPI-TYP-ENUM
type ZSPI-TYP-SSCTL
If you issue the ABORT
This applies
Its
That is, if the
Otherwise,