HP TR3271 Programming Manual page 248

TR3271 EVENT MANAGEMENT
165: ZTR3-EVT-CSS-SUBDEV-ERR
ZTR3-TKN-CLIP-SU is the CLIP subdevice number.
the value param1 in the message text.
ZTR3-TKN-CLIP-STATUS is the status returned by the CLIP.
corresponds to the value param3 in the message text.
Volatile Tokens
ZEMS-TKN-CU is a standard EMS token that contains the controller
and unit number.
if the controller uses subchannel-type I/O addressing.
Event-Message Text
In the message text, ldev corresponds to the value of ZEMS-TKN-
LDEV, n,n,%nn,%nnn corresponds to the value of ZEMS-MAP-EXIOADDR,
ldevname corresponds to the value of ZEMS-TKN-LDEVNAME, path
corresponds to the value ZCOM-TKN-NEW-PATH, param1 corresponds
to the value ZTR3-TKN-CLIP-SU, param2 corresponds to the value
ZTR3-CLIP-FUNC, and param3 corresponds to the value ZTR3-TKN-
CLIP-STATUS.
Probable Cause
The CSS CLIP responded to the I/O process with an invalid
subdevice state.
number. The value of param2 indicates the CLIP function and
The value of param3 indicates the CLIP status as
modifier.
follows:
Value
1
2
3
4
5
6
7
8
9
10
11
12
7-60
This token is present in the event buffer only
The value of param1 indicates the subdevice
Meaning
Station in use
SU already defined
Invalid station
SU not defined
Invalid subdevice
Invalid function modifier
Invalid request sequence
Protocol failure
Invalid request type (function)
Buffer allocation failed
Maximum NAKs received
WAK received
It corresponds to
It