HP TR3271 Programming Manual page 21

Table 2-1.
COMMAND
LISTOBJECTS
LOAD
RESET
RESETSTATS
START
STATISTICS
STATUS
STOP
SWITCH
TRACE
Table 2-2 shows the correspondence between the Subsystem Control
Facility (SCF) commands a human operator issues to control and
monitor the TR3271 subsystem and the programmatic commands a
management application sends to the subsystem.
table contains the command and object names in the form that you
must use in applications.
example in the text and headings for the command descriptions,
the commands and object types appear in a shortened form (that
is, without the ZCOM-CMD- and ZCOM-OBJ- prefixes).
TR3271 Programmatic Commands (Page 2 of 2)
Returns the names of a line and subdevices
known to the TR3271 subsystem.
Initiates a download of the Communications
Line Interface Processor (CLIP).
Places the CLIP in the boot state.
Returns statistical information about a line
and subdevices and then resets the statistics
counters to the subsystem default values.
Initiates the operation of a line and
subdevices.
Returns statistical information about a line
and subdevices.
Returns information about the current state of
a line and subdevices.
Terminates the operation of a line and
subdevices.
Changes the system resources used by a process
or a line.
Initiates, modifies, or terminates trace mode
on a line.
However, later in this manual, for
MANAGEMENT PROGRAMMING FOR TR3271
DESCRIPTION
Commands
For clarity, the
2-5