Table of Contents
Advertisement
def ZCOM-DDL-REQID.
02 ZCRTPID
02 ZPAID
end.
ZCOM-TKN-CMD-TIMEOUT
ZSPI-TKN-MANAGER
ZSPI-TKN-SSID
ZSPI-TKN-MAXRESP
ZSPI-TKN-RESPONSE-TYPE
ZSPI-TKN-ALLOW-TYPE
ZSPI-TKN-COMMENT
Tokens in Response Buffer
ZSPI-TKN-SSID
ZSPI-TKN-SERVER-VERSION
ZSPI-TKN-DATALIST
ZCOM-TKN-OBJNAME
ZCOM-TKN-OBJTYPE
ZSPI-TKN-ERRLIST
...
ZSPI-TKN-ENDLIST
ZSPI-TKN-RETCODE
ZSPI-TKN-ENDLIST
Tokens in Command Buffer
ZCOM-TKN-OBJNAME specifies the line name associated with the
process to be switched.
in the command.
Standard Definitions" in Section 5, "Common Definitions," and the
Communications Management Programming Manual .
ZCOM-TKN-SWITCH-CPU and ZCOM-TKN-SWITCH-PATH are standard data-
communications tokens that describe what is to be switched.
These tokens are mutually exclusive.
in the command and duplicate occurrences are not allowed.
If ZCOM-TKN-SWITCH-CPU is specified, the process is to be
switched between processors.
integer indicating the primary processor the process is to be
switched to.
This value must refer to one of the two processors
specified at system generation time.
token-type ZSPI-TYP-TIMESTAMP.
token-type ZSPI-TYP-FNAME32.
token-type ZSPI-TYP-SSID.
token-type ZSPI-TYP-INT.
token-type ZSPI-TYP-ENUM.
token-type ZSPI-TYP-ENUM.
token-type ZSPI-TYP-STRING.
token-type ZSPI-TYP-SSID.
token-type ZSPI-TYP-INT.
token-type ZSPI-TYP-LIST.
token-type ZSPI-TYP-STRING.
token-type ZSPI-TYP-ENUM.
token-type ZSPI-TYP-LIST.
token-type ZSPI-TYP-SSCTL.
token-type ZSPI-TYP-ENUM.
token-type ZSPI-TYP-SSCTL.
Your application must provide this token
This token is described in "Data-Communications
The value of this token is an
COMMANDS AND RESPONSES
type ZSPI-DDL-CRTPID.
type ZSPI-DDL-INT.
One of these tokens must be
SWITCH Command
!{}
!{}
!{}
!{}
!{}
!{}
6-115
Advertisement
Table of Contents
