HP TR3271 Programming Manual page 138

COMMANDS AND RESPONSES
RESET Command
ZSPI-TKN-SERVER-VERSION indicates the software release version of
the TR3271 subsystem. See "SPI Standard Definitions" in Section
5 for details.
ZSPI-TKN-DATALIST indicates the beginning of a data list. See
"SPI Standard Definitions" in Section 5 for details.
ZCOM-TKN-OBJNAME specifies the name of the TR3271 line that
is to be reset. Unless there is an error that prevents the
RESET command from being attempted at all, this token is present
in every response record. ZCOM-TKN-OBJNAME is described in
"Data-Communications Standard Definitions" in Section 5 and the
Communcations Management Programming Manual .
ZCOM-TKN-OBJTYPE specifies the type of object that was reset.
This token must have the value ZCOM-OBJ-LINE. This token
is described in "Data-Communications Standard Definitions" in
Section 5, "Common Definitions," and the Communications
Management Programming Manual .
ZSPI-TKN-ERRLIST indicates the beginning of an error list. See
"SPI Standard Definitions" in Section 5 for details.
ZSPI-TKN-RETCODE specifies the return code for the command. This
token is described in "SPI Standard Definitions" in Section 5
and the Distributed Systems Management (DSM) Programming Manual .
For details on the data-communications error numbers and their
associated error lists, see "Common Error Numbers and Error
Lists" in the Communications Management Programming Manual .
The possible nonzero values of RETCODE in response to the RESET
command are as follows:
ZCOM-ERR-EMPT-RSP (-33)
ZCOM-ERR-TKN-VAL-INV (-30)
ZCOM-ERR-TKN-REQ (-29)
ZCOM-ERR-TKN-DUP (-27)
ZCOM-ERR-TKN-CODE-INV (-26)
ZCOM-ERR-SSID-INV (-24)
ZCOM-ERR-SECUR-VIOL (-22)
ZCOM-ERR-OBJNAME-INV (-19)
ZCOM-ERR-OBJ-NOT-SUPP (-18)
ZCOM-ERR-OBJ-NOT-FOUND (-17)
ZCOM-ERR-FNAME-INV (-9)
ZCOM-ERR-CMD-TIMED-OUT (-7)
6-74