Connect Command - HP TR3271 Programming Manual

CONNECT Command

The CONNECT command creates a link between a TR3271 subdevice and
a TR3271 subdevice.
command is successfully completed, data can pass between TR3271
terminals and an IBM host through the TR3271 subsystem.
When you use the CONNECT command, the subsystem checks that both
the TR3271 subdevice and the target AM3270 subdevice are in the
STARTED summary state.
PTP subdevices.
as a PTP subdevice, you can redefine it using either the ZPROTO
field in the ALTER command described in this manual, or the
ALTER command described in the Subsystem Control Facility (SCF)
Reference Manual .
DSM, you can use the CMI ALTER SUBDEVICE command.
the Communications Management (CMI) Operator's Guide for more
information.
The lines for the TR3271 and targeted AM3270 subdevice must be in
the STARTED summary state.
Command
ZCOM-CMD-CONNECT
Object Type
ZCOM-OBJ-SU
Tokens in Command Buffer
ZCOM-TKN-OBJNAME
ZCOM-TKN-TARGET-MGR
ZCOM-TKN-TARGET-OBJNAME
ZCOM-TKN-TARGET-OBJTYPE
ZCOM-MAP-REQID
def ZCOM-DDL-REQID.
02 ZCRTPID
02 ZPAID
end.
ZCOM-TKN-CMD-TIMEOUT
ZSPI-TKN-MANAGER
ZSPI-TKN-SSID
Only subdevices can be connected.
In addition, they must both be defined as
If the TR3271 subdevice is not already defined
If the AM3270 subsystem is not supported by
token-type ZSPI-TYP-STRING.
token-type ZSPI-TYP-FNAME32.
token-type ZSPI-TYP-STRING.
token-type ZSPI-TYP-ENUM.
!MAP is optional, but if present,
!fields are required.
token-type ZSPI-TYP-TIMESTAMP.
token-type ZSPI-TYP-FNAME32.
token-type ZSPI-TYP-SSID.
COMMANDS AND RESPONSES
type ZSPI-DDL-CRTPID.
type ZSPI-DDL-INT.
CONNECT Command
Once this
Refer to
!{}
!{}
!{}
!{}
>
6-31