Ztr3-Err-No-Obj-In-Sel-State - HP TR3271 Programming Manual

7:

ZTR3-ERR-NO-OBJ-IN-SEL-STATE

The STATUS command has been issued with the SEL-SUMSTATE modi-
fier. There are no objects currently in the selected summary
state.
ZSPI-TKN-ERRLIST
ZSPI-TKN-ERROR
ZCOM-TKN-OBJNAME
ZCOM-TKN-OBJTYPE
ZSPI-TKN-ENDLIST
Tokens
ZSPI-TKN-ERROR is the standard SPI error token described in the
Distributed Systems Management (DSM) Programming Manual .
value consists of the target subsystem ID and the error number
ZTR3-ERR-NO-OBJ-IN-SEL-STATE.
the error list.
ZCOM-TKN-OBJNAME is the object name on which the error occurred
in the command.
presence is relevant to the cause of the error.
error was detected after the subsystem made choices based on the
object name, this token is present in the error list.
it is omitted from the list.
ZCOM-TKN-OBJTYPE is the object type provided with the command on
which the error occurred.
against which the command was issued.
listed in Section 6.
Recommended Action
There is no action necessary.
7:
This token is always present in
This token is present in the error list if its
Its value defines the type of object
This is only a warning.
ERROR NUMBERS AND ERROR LISTS
ZTR3-ERR-NO-OBJ-IN-SEL-STATE
type ZSPI-TYP-LIST
type ZSPI-TYP-ERROR
type ZSPI-TYP-STRING
type ZSPI-TYP-ENUM
type ZSPI-TYP-SSCTL
That is, if the
Possible object types are
Its
Otherwise,
A-9