Table of Contents
Advertisement
COMMANDS AND RESPONSES
STATUS Command
Tokens in Command Buffer
ZCOM-TKN-OBJNAME specifies the line and subdevices for which
information is requested.
token in the command.
Communications Standard Definitions" in Section 5, "Common
Definitions," and the Communications Management Programming
Manual .
ZCOM-MAP-REQID and ZCOM-TKN-CMD-TIMEOUT are standard data-
communications tokens that your application can optionally pro-
vide.
These tokens are described in "Data-Communications
Standard Definitions" in Section 5 and the Communications
Management Programming Manual .
ZCOM-TKN-SUB specifies whether subordinates are to be affected by
the STATUS command.
of this token are as follows:
ZCOM-VAL-SUB-ALL
ZCOM-VAL-SUB-ONLY
ZCOM-VAL-SUB-NONE
If the SUB modifier is not present, information for the named
object is returned.
ZCOM-TKN-SEL-SUMSTATE specifies whether an object is selected
based on its current summary state.
two fields, an enumerated field that indicates the summary state,
and a Boolean field that indicates whether objects currently in
that summary state are to be included in the information returned
by the subsystem.
6-100
Your application must provide this
This token is described in "Data-
For the STATUS command, the possible values
If the object type is LINE, return information
for the named line and all its subordinate
subdevices.
If the object type is SU, return
information about the named subdevice.
If the object type is LINE, return information
for the subdevices subordinate to the named
line; the line is not to be affected by this
command.
This value is invalid for the SU
object type.
If the object type is LINE, return information
for the named line only.
type is SU, return information for the named
subdevice.
If the object
This modifier consists of
Advertisement
Table of Contents
