Table of Contents
Advertisement
COMMANDS AND RESPONSES
STOP Command
ZCOM-ERR-TKN-VAL-INV (-30)
Your management application specified the SUB modifier with
the value ZCOM-VAL-SUB-ONLY for the SU object.
only accepts the value ZCOM-VAL-SUB-NONE or ZCOM-VAL-SUB-ALL
for the SUB modifier.
ZCOM-ERR-CMD-MISMATCH (-4)
Your management application tried to stop a process by using
the value ZCOM-OBJ-PROC.
values ZCOM-OBJ-LINE and ZCOM-OBJ-SU.
ZCOM-ERR-CMD-INV-IN-SUMSTATE (-3)
Your management application tried to stop a line in the DIAG
summary state or a subdevice subordinate to a line in the DIAG
summary state.
the STOP command for the line object, this includes times when
the ZCOM-VAL-SUB-ALL modifier is used.
ZTR3-ERR-OPENED-SU-EXIST (8)
Your management application issued the STOP command for the
LINE object type, but there is one or more subordinate SUs
that are opened by an application.
when the LINE object has been specified, but does not apply
when the LINE object has been specified with the SUB modifier
that has the value ZCOM-VAL-SUB-ONLY.
ZTR3-ERR-CONN-EXIST (12)
Your management application issued the STOP command for the
LINE or SU object type, but a PTP subdevice is currently
connected to a TR3271 subdevice.
must disconnect the TR3271 subdevice before stopping it.
ZTR3-ERR-SU-OPENED (13)
Your management application has issued the STOP command but
an SU is currently opened by an application.
returned only when the LINE object is specified with the value
ZCOM-VAL-SUB-ONLY or ZCOM-VAL-SUB-ALL for the SUB modifier, or
the SU object is specified.
or named SU cannot be a PTP subdevice.
subdevice.
6-112
The command is valid only for the
The DIAG summary state prevents processing of
In addition, the subordinate SU
The SU object
This message applies only
Your management application
This error is
It must be a CRT
Advertisement
Table of Contents
