HP TR3271 Programming Manual page 186

COMMANDS AND RESPONSES
TRACE Command
ZTR3-VAL-TRACE-OPT-CLBI
ZTR3-VAL-TRACE-OPT-CLBO
ZTR3-VAL-TRACE-OPT-CLIP
ZTR3-VAL-TRACE-OPT-CLIPDI
ZTR3-VAL-TRACE-OPT-CLIPDO
ZTR3-VAL-TRACE-OPT-CLIPL2
ZTR3-VAL-TRACE-OPT-CLIPL3
ZTR3-VAL-TRACE-OPT-CLIPL4
ZTR3-VAL-TRACE-OPT-CLIPREQ
ZTR3-VAL-TRACE-OPT-CLIPCTLI
ZTR3-VAL-TRACE-OPT-CLIPCLTO
ZTR3-VAL-TRACE-OPT-ALL
Duplicate occurrences of ZCOM-TKN-TRACE-OPT are allowed.
You can select more than one option.
ZCOM-MAP-REQID and ZCOM-TKN-CMD-TIMEOUT are standard data-
communications tokens that your application can optionally
provide. These tokens are described in "Data-Communications
Standard Definitions" in Section 5 and the Communications
Management Programming Manual .
(ZSPI-TKN-) MANAGER, SSID, MAXRESP, CONTEXT, RESPONSE-TYPE,
ALLOW-TYPE, and COMMENT are standard SPI tokens.
exception of the ZSPI-TKN-SSID token, which your management
application must pass to SSINIT, these tokens are optional.
These tokens are described in "SPI Standard Definitions" in
Section 5 and the Distributed Systems Management (DSM)
Programming Manual .
Tokens in Response Buffer
ZSPI-TKN-SSID is an echo of the subsystem ID value provided
by your application.
Definitions" in Section 5, "Common Definitions," and the
Distributed Systems Management (DSM) Programming Manual .
6-122
Trace CLB inbound frames.
Trace CLB outbound frames.
Enables CLIP tracing.
bit must be set on, if one
or more bits in the 16
through 29 range is to be set.
Trace CLIP inbound frames.
Trace CLIP outbound frames.
Trace CLIP level-2 events.
Trace CLIP level-3 events.
Trace CLIP level-4 events.
Trace CLIP requests.
Trace CLIP control input.
Trace CLIP control output.
Sets all trace options.
This token is described in "SPI Standard
This
With the