Object Types - HP TR3271 Programming Manual

Although all data-communications subsystems must use symbolic
names of the form ZCOM-CMD- name , each subsystem defines which
command numbers it supports.
following commands:
These commands are described in Section 6, "Commands and
Responses."

Object Types

Object-type numbers represent the object type (class) of an
object. The value of the object-type number is subsystem-
specific and has a symbolic name.
is of the form ZCOM-OBJ- type , where type identifies the object
type. For example, ZCOM-OBJ-SU identifies the subdevice object
type in data-communications subsystems, including the TR3271
subsystem.
Note that object-type numbers are part of the header of each
command and response.
TYPE contains the object-type number.
multiple objects in a response or an object is returned within
a data list, an object-type number is contained in the ZCOM-TKN-
OBJTYPE token.
form ZCOM-OBJ- type , where type identifies the object type.
The TR3271 subsystem supports the following object types:
The objects controlled by the TR3271 subsystem are organized in
a hierarchy by object type.
is PROCESS, LINE, and SU.
the hierarchy and applies to only two commands, GETVERSION and
LISTOBJECTS.
ELEMENTS OF SPI MESSAGES FOR THE SUBSYSTEM
The TR3271 subsystem supports the
ABORT
ADD
ALTER
CONNECT
DELETE
DISCONNECT
GETVERSION
INFO
LISTOBJECTS
The header token named ZSPI-TKN-OBJECT-
The symbolic name of the value is also of the
PROCESS
LINE
SU
NULL
In descending order, the hierarchy
The NULL object type is not within
Command Numbers
LOAD
RESET
RESETSTATS
START
STATISTICS
STATUS
STOP
SWITCH
TRACE
The symbolic name of the value
However, if there are
3-5