Table of Contents
Advertisement
ZSPI-TKN-ENDLIST indicates the end of a data list or an error
list.
See "SPI Standard Definitions" in Section 5 for details.
Operational Notes
LOAD is a sensitive command.
When the command is completed, the line remains in the STOPPED
summary state.
The line must be in the STOPPED summary state when this
command is issued.
Use the START command to start the line.
The RESET command should be issued before the LOAD command,
unless the NOLOAD modifier has been specified at system
generation time.
COMMANDS AND RESPONSES
LOAD Command
6-71
Advertisement
Table of Contents
