System Overview; D-113D Projection System Block Diagram - Runco 3Dimension D-113d Installation & Operation Manual

The D-113d Projection System consists of the following components:
• The projector, consisting of two discrete optical engines stacked one on top of the
other to provide either two-dimensional (2D) or three-dimensional (3D) content.
• A Primary DHD Controller unit that provides a video signal and on-screen display (OSD)
menu to the "left eye" optical engine of the projector. In addition, the Primary DHD
Controller controls all of the other system components (projector, Secondary DHD
Controller and 3Dimension Processor), in response to user input via its infrared (IR)
remote control unit or front-panel keypad, an external control system or HDMI
Consumer Electronics Control (CEC) messages.
• A Secondary DHD Controller unit that provides a video signal and OSD menu to the
right optical engine of the projector.
• The 3Dimension Processor, which accepts video signals from multiple analog and
digital sources, multiplexes them and distributes them to the Primary and Secondary
DHD Controllers.
Figure 2-1 shows how these components connect to and interact with each other. The
following sections describe each one in detail.
Video
Remote Control
Sources
HDMI, Component, RGB, Composite
Figure 2-1. D-113d Projection System Block Diagram
D-113d Projection System Installation/Operation Manual
HDMI
IR Audio Out
HDMI Left
Primary
RS-232
DHD Controller
Trigger
RS-232
HDMI Right
Secondary
RS-232
DHD Controller
Trigger
3Dimension
Processor

2. System Overview

Anamorphic
Lens
Projector
Left-Eye
Optical Engine
Anamorphic
Lens
Right-Eye
Optical Engine
7