Runco Reflection CL-810 Owner's Operating Manual
  1. Manuals
  2. Brands
  3. Runco Manuals
  4. Projector
  5. Reflection CL-810 CineWide
  6. Owner's operating manual

Runco Reflection CL-810 Owner's Operating Manual

Runco owner's operating manual dlp projector cl-810
Hide thumbs Also See for Reflection CL-810:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Operation Manual
O
'
O
M
W N E R
S
P E R A T I N G
A N U A L
CL-810
DLP™ Projector

Advertisement

Table of Contents
loading

Related Manuals for Runco Reflection CL-810

Summary of Contents for Runco Reflection CL-810

  • Page 1 ’ W N E R P E R A T I N G A N U A L CL-810 DLP™ Projector...

  • Page 3: Table Of Contents

    Turning off the Power ... 30 On-Screen Display Menus ... 31 Using the Menu ... 31 Main Menu ... 31 Picture Quality Adjustments ... 32 Aspect Ratio ... 34 Installation ... 35 Option ... 37 Runco CL-810 Owner’s Operating Manual Table of Contents...
  • Page 4 Setup ... 39 ISF Calibration ... 44 Lamp Replacement ... 47 Troubleshooting ... 49 RS-232 Setup ... 51 Connecting RS-232 to the Projector ... 51 RS-232C Control Codes ... 52 Specifications ... 55 Dimensions ... 57 Runco CL-810 Owner’s Operating Manual...

  • Page 5: Limited Warranty

    PARTS: (Not including the lamp) Runco will provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship for a period of two (2) years from the effective date of delivery to the end user.
  • Page 6 IMPORTANT: WARRANTY REGISTRATION: Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach you promptly if we should discover a safety problem or product update for which you must be notified.
  • Page 7 ADDITIONAL INFORMATION: To locate the name and address of the nearest Runco Authorized Service Center, or for additional information about this Limited Warranty, please call or write: Attn: Customer Service Department RUNCO VIDEO PRODUCT INFORMATION RETAIN THIS INFORMATION FOR YOUR RECORDS...

  • Page 8: Safety Precautions

    Safety Precautions Thank you for your purchase of this quality Runco video projector! It has been designed to provide you with the quality of video that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the menus and operation.

  • Page 9: Overview

    Imaging Science Foundation. These standards provide for superior image quality and assure the user that restoration to preset values for both day and night viewing is accomplished by just the press of a button, should the projector’s settings or calibrations be inadvertently disturbed.

  • Page 10: Front/Top View

    Can be rotated to match floor or ceiling installation. See “Runco Logo” on page 14. 2. Projection Lens 3. Top IR Sensor 4. Intake Vent 5. Status LEDs See “Control Panel” on page 13. 6. Exhaust Vent 7. Front IR Sensor Runco CL-810 Owner’s Operating Manual...

  • Page 11: Rear / Bottom View

    2. AC Power IN Socket 3. AC Power Switch 4. Runco Logo Can be rotated to match floor or ceiling installation. See “Runco Logo” on page 14. 5. Cable Opening Pass cables through this opening. Runco CL-810 Owner’s Operating Manual 6. Cable Access Door Open to access connectors.
  • Page 12 Overview This page is intentionally left blank. Runco CL-810 Owner’s Operating Manual...

  • Page 13: Controls And Functions

    - Flashing Green for 110 seconds after the projector was powered off indicating that the lamp is cooling down. Runco CL-810 Owner’s Operating Manual Controls and Functions 3. TEMP LED Indicates the status of the fans and internal temperature - Red when the internal temperature is too high.

  • Page 14: Connector Panel

    DTV Y/P or DTV RGB video signal input The Runco logos on the front and rear of the projector can be rotated to match a floor or ceiling installation. To rotate the logo, grip it at the sides, pull it away from the projector and rotate it 180 degrees.

  • Page 15: Remote Control

    Exit and save menu item setting(s). FOCUS FOCUS MENU Turns on/off the on-screen display menu. Runco CL-810 Owner’s Operating Manual LIGHT Press to turn on the remote control back light. Press to turn on the projector. Press to turn off the projector.
  • Page 16 Enable the PIP function. Use ARROW keys to adjust the position of the PIP window. See “PIP / PBP Function” on page 29. PIP+ Enlarge the size of PIP window. PIP- Shrink the size of PIP window. Runco CL-810 Owner’s Operating Manual...

  • Page 17: Installation

    • Ambient conditions may possibly impede the operation of the remote control. If this happens, point the remote control at the projector, and repeat the operation. • The Ø icon appears on the screen when a button for an unavailable function is pressed.

  • Page 18: Installation Considerations

    The audience sitting within the viewing cone area sees a brighter image than those sitting just outside this area. Runco generally does not recommend use of curved screens due to excessive brightness and uncorrectable geometrical distortion.
  • Page 19 Optical screens take light from the projector and redirect it to increase the light intensity at the front of the screen. This reduces it in other areas. A viewing cone similar to that of a curved, front-screen installation is created.
  • Page 20 You can quickly estimate the throw distance by taking the width of the screen and multiplying it by the lens throw ratio. (The CL-810 has a lens throw ratio of between 1.82 and 2.43.) �������������������������...
  • Page 21 Screen Lens Center Projection Distance If it is not possible to align the projector and screen as shown above, you can use the lens shift (LENS) control on the projector remote to vertically center the image on the screen. If the screen is significantly higher or lower than the projector, you can also tilt the projector at a slight angle.
  • Page 22 CEILING MOUNT—The projector can also be inverted and suspended from the ceiling using a specially designed ceiling mount fixture. This type of mounting is recommended for fixed installations and for those that want the projector out of sight or have a limited space for projector and audience.

  • Page 23: Connections

    When connecting your equipment: 1. Turn off all equipment before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly connected. DVD Player Runco CL-810 Owner’s Operating Manual S-VID / S-VID Connections Connecting Video Inputs ➤...
  • Page 24 The RGB BNC input (labeled COMP 2 / RGB) supports two kinds of HDTV formats: Progressive component (DTV Y/P detect the resolution. S-VID / Green Blue Red DTV Source S-VID / Green Blue Red Horiz Vert DTV Source ) and DTV RGB. The projector will automatically S-VID S-VID Runco CL-810 Owner’s Operating Manual...

  • Page 25: Connecting A Computer (Gbrhv)

    Interface) cable to connect the projector to an HDMI device. HDMI Source (DVD player or HD tuner with HDMI or DVI out) Runco CL-810 Owner’s Operating Manual This unit is compatible with the following computer resolutions: 1024x768, 800x600 and 640x480. S-VID / S-VID...

  • Page 26: Connecting To Ac Power

    Connections Connecting to AC Power The CL-810 ships with various types of AC power cords. Choose the one that is appropriate to your locale. Plug the female end of the power cord into the AC receptacle on the rear of the projector (AC 100V ~ 240V).

  • Page 27: Basic Operation

    • To adjust the projector height or compensate for a mounting surface that isn’t level, turn the four adjustable feet on the bottom of the projector. Runco CL-810 Owner’s Operating Manual Basic Operation Turning on the Power LIGHT S-VID COMP1...

  • Page 28: Selecting Video Memory

    16:9 image. • Press BRT (Brightness) to adjust picture brightness. • Press CONT (Contrast) to adjust picture contrast. Press COL (Color) to adjust color • intensity. • Press TNT (Tint) to adjust color tones. Runco CL-810 Owner’s Operating Manual...

  • Page 29: Setting The Menu

    • Press PIP+ or PIP- to adjust the size of the PIP window. • Adjust the position of the PIP window with the arrow buttons (▲,◄,▼,►). Runco CL-810 Owner’s Operating Manual INFO ENTER EXIT MENU For more information on settings, See “On- Screen Display Menus”...

  • Page 30: Turning Off The Power

    • The fans will run for three minutes to cool. • You can turn the projector back on after approximately two minutes. LIGHT S-VID COMP1 COMP2 RGBHD HDMI Runco CL-810 Owner’s Operating Manual...

  • Page 31: On-Screen Display Menus

    Aspect Ratio Installation Option Set Up ISF Calibration Runco CL-810 Owner’s Operating Manual On-Screen Display Menus This unit is equipped with an on-screen display (OSD) menu for making adjustments and changing settings. There are five menu languages; see the Language setting under “Installation”...

  • Page 32: Picture Quality Adjustments

    Select Sharpness to adjust the sharpness of the projected image (-14 = minimum; +20 = maximum). This setting has no effect if the Sharpness Filter is set to 0 (refer to the next paragraph). Adjustment Runco CL-810 Owner’s Operating Manual...
  • Page 33 With a 480p or higher-resolution signal, the sharpness control is applied only to the output signal and only when you set the Sharpness filter to “on” (1). The CL-810 has six memory settings for Color Temperature. Four of these settings are factory set to default as follows:...

  • Page 34: Aspect Ratio

    ‘blanked off’. This ratio is best suited for LaserDisc movies or non-anamorphic DVDs. Active Image Area • VIRTUALWIDE A 4:3 image is transformed into a 16x9 image. Runco CL-810 Owner’s Operating Manual...

  • Page 35: Installation

    NOTE: When you change a setting in the Installation menu, the change takes effect immediately; you do not need to press Enter afterwards. (Press Exit to return to the previous menu or Menu to exit.) Runco CL-810 Owner’s Operating Manual Installation On-Screen Display Menus...
  • Page 36 To correct distortion resulting from the angle of the projection, select Keystone Adjust and use the ◄ or ► arrows to make the image rectangular. NOTE: Runco recommends that the keystone feature not be used unless absolutely necessary, as it may cause artifacts in the image.

  • Page 37: Option

    10 minutes to 3 hours, in 10-minute increments. To disable the Sleep Timer, set it to 0. To find out how long the projector lamp has been in use, select Lamp Hours and press Enter. Press the ◄ or ► arrows to set the OSD Timer. This timer controls how long the menus remain on-screen after selecting them.
  • Page 38 RGB images such as those from a PC. Adjust as desired, keeping in mind that reducing noise (which reduces high frequencies) may also soften the image. PC & HD Adjust Auto Freq. Phase H.Pos. V.Pos. PIP/PBP Enable PIP Set Up PBP Set Up Runco CL-810 Owner’s Operating Manual Yes?

  • Page 39: Setup

    Gamma, Gain and Offset, select Store Color Temp.4 or Store Color Temp.5 to store your settings. To recall them, set the Color Temperature to +4 or +5 in the Image Adjustment menu (refer to “Picture Quality Adjustments,” earlier in this section). Runco CL-810 Owner’s Operating Manual Passcode Please Enter...
  • Page 40 For HDTV, DVDs and other video sources, Over Scan is generally not necessary or desirable. Gamma Selection RUNCO Enhance 1 RUNCO Enhance 2 ISF Day H Enhance V Enhance Chroma Enhance H Threshold V Threshold Chroma Threshold Image Over Scan Runco CL-810 Owner’s Operating Manual +4 %...
  • Page 41 You can choose to run the lamp as bright as possible (250W; this is the default setting) or you can choose the lower (200W) setting. Generally, lower lamp output can prolong the life of the lamp, but decreases brightness. Runco CL-810 Owner’s Operating Manual ➤ Image Shift ➤...
  • Page 42 • Another device in the theater (a DVD player, for example) is responding to commands from the CL-810 remote control in ways that are unpredictable or undesirable. • You have multiple CL-810 projectors and want to control them independently, as opposed to broadcasting commands from a single remote to all of them.
  • Page 43 (You do not need to re-enter the passcode.) Image Over Scan Image Shift Amplitude Adjust Video Black Level Lamp Power Remote Control Reset Lamp Timer Fan Control Return to User OSD Runco CL-810 Owner’s Operating Manual ➤ Fan Control ➤ Return to User OSD On-Screen Display Menus...

  • Page 44: Isf Calibration

    White Balance ➤ Gamma Selection ➤ Blue Image ➤ The CL-810 has been designed to incorporate setup and calibration standards established by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, industry-recognized standards for optimal video performance and has implemented a training program for technicians and installers to use these standards to obtain optimal picture quality from Runco video display devices.
  • Page 45 Press the ◄ or ► arrows to set the Splash Screen Timer. Splash Screen Timer This timer controls how long the startup (ISF and Runco logo) image stays on-screen after you turn on the projector. Select from 5 to 60 seconds, in 1-second increments. When finished, press Exit.
  • Page 46 User OSD and press Enter. To return to the ISF Calibration menu, select it from the Main Menu, press Enter twice, then press MENU on the remote control. (You do not need to re-enter the passcode.) Runco CL-810 Owner’s Operating Manual...

  • Page 47: Lamp Replacement

    The lamp should be replaced when it reaches the end of its life (typically 2000 hours), or sooner if a noticeable degradation in brightness occurs. Contact your Runco dealer to obtain a replacement lamp. 1. Turn off the projector and unplug the power cord.
  • Page 48 Lamp Replacement This page is intentionally left blank. Runco CL-810 Owner’s Operating Manual...

  • Page 49: Troubleshooting

    The lamp has exceed its red; POWER LED specified usage hours. is green The lamp has burned out. Runco CL-810 Owner’s Operating Manual Troubleshooting REMEDY Plug the power cord into the AC power socket on the rear of the projector and an electrical outlet.
  • Page 50 Troubleshooting This page is intentionally left blank. Runco CL-810 Owner’s Operating Manual...

  • Page 51: Rs-232 Setup

    RS-232 Pin Assignments D-Sub 9-pin female 1, 4, 6, 7, 8, 9 2. Connect the COM port to the RS-232 port on the projector. Use a standard, 4-wire RJ-11 telephone cable, wired straight-through. RJ-11 to D-Sub 9-pin (not included) Yellow...

  • Page 52: Rs-232C Control Codes

    RS-232C Control Codes NOTES: 1. All codes are in the ASCII format. 2. A carriage return is required after each command. 3. The projector will not accept RS-232 commands for 20 seconds after it is turned on or off. Code Function...
  • Page 53 Zoom In x284x Zoom Out x285x Focus (rotate lens to right) x286x Focus (rotate lens to left) x287x RVR = Full On (open) x288x RVR = Full Off (closed) Runco CL-810 Owner’s Operating Manual RS-232C Control Codes (continued) RS-232 Setup...
  • Page 54 RS-232 Setup This page is intentionally left blank. Runco CL-810 Owner’s Operating Manual...

  • Page 55: Specifications

    250W NSH Lamp Life: 2000 hours Inputs: (1) Composite Video, (1) S-Video, (1) RGB/Component (via BNC), (1) RCA Component Video, (1) HDMI, (1) RS-232 12V Output: Max. 0.25 Amps, active when the projector is on Runco CL-810 Owner’s Operating Manual Specifications...
  • Page 56 - Contrast Ratio: 1500:1 to 3100:1 These are typical projector brightness and contrast specifications found in most companies’ sales literature. Runco includes these measurements in its literature to allow for direct comparison with other manufacturers’ projectors. These measurements are typically...

  • Page 57: Dimensions

    9.25 in (235.00 mm) 12.99 in. 1.38 in. (35.00 mm) (330.00 mm) 17.72 in. (450.00 mm) 18.21 in. (462.50 mm) 7.28 in. (185.00 mm) 8.16 in. (207.27 mm) 4.43 in. (112.50 mm) 8.85 in. (224.77 mm) Runco CL-810 Owner’s Operating Manual...
  • Page 58 SERIA L N UM BE R RUMA-011135 rev 09-12-05 Runco International • 2900 Faber Street • Union City, CA 94587 • Ph (510) 324-7777 / (800) 23RUNCO / Fax (510) 324-9300 www.runco.com Runco CL-810 Owner’s Operating Manual...

Table of Contents