System Overview; Lightstyle™ Series Ls-12Hbd Active 3D Projection System Block Diagram - Runco LightStyle LS-12HBd Installation & Operation Manual

A LightStyle™ Series LS-12HBd Active 3D Projection System consists of the following
components:
• The projector (equipped with dual digital video inputs) with optional anamorphic lens
and lens transport assembly.
• The DC-300 Dimension Digital Controller™ unit that provides "left-eye" and "right-eye"
video signals and the on-screen display (OSD) menu to the projector. In addition, the
Dimension Digital Controller controls the projector in response to user input via its
infrared (IR) remote control unit or front-panel keypad, an external control system or
HDMI Consumer Electronics Control (CEC) messages.
• An Active 3D Emitter that receives a left/right synchronization signal from the projector
and transmits it to the Active 3D Glasses worn by the viewers. This signal precisely
controls when left and right fields are visible through the glasses.
Figure 2-1 shows how these components connect to and interact with each other. The
following sections describe each one in detail.
Remote
Control
Video
Sources
HDMI, DisplayPort,
Component, SCART,
RGB, Composite
Figure 2-1. LightStyle™ Series LS-12HBd Active 3D Projection System Block
Diagram
LightStyle™ LS-12HBd Installation/Operation Manual
HDMI Audio Out
IR
DC-300
Dimension Digital Controller
Primary
Video
Scaler
Secondary Video
Secondary
Video
Scaler
2D/3D Video
Decoder/
Multiplexer

2. System Overview

Anamorphic
Projector
Primary Video
(Left)
Optical Engine
RS-232
Trigger
(Right)
Active 3D
L/R Stereo Sync
Emitter
5
Lens
RF
Active 3D
Glasses
System Overview