Parts List - Runco 3Dimension D-113d Installation & Operation Manual

Your D-113d is shipped with the following items. If any items are missing or damaged,
please contact your Runco dealer or Runco Customer Service at (800) 23RUNCO.
• D-113d Projection System:
• Projection Units (2)
• Two (2), DHD Controller units (Primary and Secondary)
• 3Dimension Processor
• Remote Control Unit and two (2), AAA-size batteries
• AC power cords for projector (with ferrite sleeve, rated at 15 amps) (2)
• AC Power Cords for DHD Controller units and 3Dimension Processor (3)
• Cables and Adapters for Connecting the DHD Controllers to Each Other and to the
3Dimension Processor:
• HDMI-to-HDMI Cable, 1.6 feet (0.5 meters) (2)
• BNC-to-BNC Cable, 11.8 inches (0.3 meters) (10)
• RCA-to-RCA Cable, 11.8 inches (0.3 meters) (2)
• RS-232 Cable (Null-modem), DB-9 female to DB-9 female, 11.8 inches (0.3 meters)
• RJ-11 Telephone Cable, 50 feet (15.24 meters) (2)
• Serial Port Adapter, RJ-11 Female to DB-9 Male (2)
• Panavision™ 3D Glasses (6 pairs)
• HDMI-to-HDMI Cables (2), sold separately (refer to Optional Accessories, below)
• Rack-mount hardware for the DHD Controllers and 3Dimension Processor
• Spacer Legs (4)
• 5.0-mm Hex wrench (for attaching the Spacer Legs to the top and bottom projection
units)
• Runco D-113d Quick Setup Guide
Optional Accessories:
• CineWide™ with AutoScope™ system (secondary anamorphic lens and motorized
mount)
• Additional 3D glasses
• HDMI-to-HDMI Cable, length specified at time of order:
• 16.4 feet (5.0 meters) (part number 903-1010-00)
• 24.6 feet (7.5 meters) (part number 903-1011-00)
• 32.8 feet (10.0 meters) (part number 903-1012-00)
• 49.2 feet (15.0 meters) (part number 903-1013-00)
• 65.6 feet (20.0 meters) (part number 903-1014-00)
D-113d Projection System Installation/Operation Manual 5
Introduction

Parts List