Secondary Dhd Controller; Secondary Dhd Controller Front And Rear Panels - Runco 3Dimension D-113d Installation & Operation Manual

The Secondary DHD Controller provides a video signal and OSD menu to the right-eye
optical engine of the projector.
Figure 2-6 shows the Secondary DHD Controller front and rear panel.
1
2
DHD4
Secondary
6
Figure 2-6. Secondary DHD Controller Front and Rear Panels
1. RUNCO ICON
Lights blue to indicate that the controller is on or powering up.
2. MAIN POWER SWITCH
Disconnects or applies power to the DHD Controller.
3. USB
A standard, USB Series "B" connection to a personal computer, for performing
software upgrades and other service procedures.
4. RS-232 (To Accessory Box)
A male, 9-pin D-sub connector for interfacing with the Primary DHD Controller. (Use a
"null-modem" serial cable for this connection.)
5. Display Control
Connect this to the RS-232 input on the "right eye" (bottom) optical engine on the
D-113d projector.
6. POWER INPUT (100 to 240 VAC)
Connect the DHD Controller to power here.
D-113d Projection System Installation/Operation Manual
Do not connect video sources or control systems to this box.
Pr Pr
R R
Y Pb Pr H
G G B B R R
A B C D
7
TRIGGERS TRIGGERS
1 1 2 2
F T G
HDMI 1
Video 1 Video 2
HD2 2
Pb Pb Pr Pr Video 3 Video 3
V
E
8
15
System Overview
2.4
Secondary DHD
Controller
3 4 5
Display Control
USB RS-232
IR IR
H
HDMI Out
HDMI 3
To Display
9 10
RS232 RS232