Trip Event And History Monitoring - Hitachi X200 Series Instruction Manual

Func.
Code SRW Display
D007 Scaled output frequency
monitor
F-Cnv
D013 Output voltage monitor
Vout
D016 Cumulative operation
RUN time monitor
RUN
D017 Cumulative power-on time
monitor
RUN
D018 Cooling
monitor
TH-Fin

Trip Event and History Monitoring

The trip event and history monitoring feature lets you cycle through related information
using the keypad. See
more details.
Func.
Code SRW Display
D080 Trip counter
ERR CNT
D081 Trip monitor 1
ERR1
D082 Trip monitor 2
ERR2
D083 Trip monitor 3
ERR3
D102 DC bus voltage monitor
Vpn
D104 Electronic thermal monitor
E-THM
"D" Function
Name /
Displays
scaled by the constant in B086.
Decimal point indicates range:
XX.XX
XXX.X
XXXX.
XXXX
00000.00
Voltage of output to motor,
Range is 0.0 to 600.0V
00000V
Displays total time the inverter has
been in RUN mode in hours.
Range is 0 to 9999 / 1000 to 9999 /
100 to 999 (10,000 to 99,900)
0000000hr
Displays total time the inverter has
been powered up in hours.
Range is 0 to 9999 / 1000 to 9999 /
0000000hr
100 to 999 (10,000 to 99,900)
Fin temperature Temperature of the cooling fin.
(0.0~200)
0000.0 C
"Monitoring Trip Events, History, &
"D" Function
Name /
Number of trip events,
Range is 0. to 9999
00000
Displays trip event information:
Error code
########
Output frequency at trip point
Motor current at trip point
DC bus voltage at trip point
Cumulative inverter operation
########
Cumulative power-ON time at
########
Voltage of inverter internal DC bus,
Range is 0.0 to 999.9
0000.0Vdc
Accumulated value of electronic
thermal detection, range is from 0.0
to 100.0
0000.0%
Description
the output frequency
0.00 to 99.99
100.0 to 999.9
1000. to 9999.
1000 to 9999
(x10=10000 to 99999)
Conditions" on page 6-5 for
Description
time at trip point
trip point
3 7
3 7
Run
Mode Units
Edit
Hz times
constant
V
hours
hours
C
Run
Mode Units
Edit
events
V
%