Hitachi X200 Series Instruction Manual page 142

Func. Name /
Code SRW Display
C041 Overload level setting
OV LVL
C241 Overload level setting,
2nd motor
2OV LVL
C042 Frequency arrival setting
for acceleration
ARV ACC 0000.0Hz
C043 Frequency arrival setting
for deceleration
ARV DEC 0000.0Hz
C044 PID deviation level setting
ARV PID
C052 PID FBV function high
limit
PID LtU
C053 PID FBV function variable
low limit
PID LtL
"C" Function
Sets the overload signal level
between 0% and 200% (from 0 to
two time the rated current of the
001.60A
inverter)
Sets the overload signal level
between 0% and 200% (from 0 to
two time the rated current of the
001.60A inverter)
Sets the frequency arrival setting
threshold for the output frequency
during acceleration,
range is 0.0 to 400.0 Hz
Sets the frequency arrival setting
threshold for the output frequency
during deceleration,
range is 0.0 to 400.0 Hz
Sets the allowable PID loop error
magnitude (absolute value), SP-PV,
range is 0.0 to 100%
003.0%
When the PV exceeds this value,
the PID loop turns OFF the PID
second stage output, range is 0.0 to
0100.0%
100%
When the PV goes below this
value, the PID loop turns ON the
PID second stage output, range is
0000.0%
0.0 to 100%
Description
3 59
3 59
Defaults
Run
Mode -FE -FU
Units
Edit
(EU) (USA)
Rated current A
for each
inverter model
Rated current A
for each
inverter model
0.0 0.0 Hz
0.0 0.0 Hz
3.0 3.0 %
100.0 100.0 %
0.0 0.0 %