Qlogic SANbox 6142 User Manual page 92

7 – SANsurfer iSCSI/FC Router Manager
System Tree Window
IPv4 Management Info – Select this check box to use IPv4 (Internet
Protocol version 4, 32-bit addressing), then use the radio buttons to identify
whether to use either a dynamic or static IP address.
IPv6 Management Info – Select this check box to use IPv6 (Internet
Protocol version 6, 128-bit addressing), then use the radio buttons to identify
whether to use either a dynamic or static IP address.
7-14
IP Address – Displays the management port's subnet mask.
If you selected the Obtain an IP address automatically (DHCP)
radio button, the system obtains the IP address automatically
through DHCP.
If you selected the Use the following IP address radio button,
you can configure the IP address.
Subnet Mask – Displays the management port's subnet mask.
If you select the Obtain an IP address automatically (DHCP),
the system obtains the subnet mask automatically through
DHCP.
If you selected the Use the following IP address radio button,
you can configure the subnet mask.
Gateway – Displays the IP address of the server acting as a gateway
to your Internet connection.
If you select the Obtain an IP address automatically (DHCP),
the system obtains the gateway address automatically through
DHCP.
If you selected the Use the following IP address radio button,
you can specify the gateway address.
IPv6 Management Info – Select this check box if you want to use
IPv6, then use the radio buttons to identify whether to use a dynamic
or static IP address.
IPv6 Address1 – The first user-assigned IPv6 address to which the
port responds. A value of :: indicates that an IPv6 address has not
been assigned. Although you may modify the IP address in this
window, you will typically set it using the Configuration Wizard.
IPv6 Address2 – The second user-assigned IPv6 address to which
the port responds. A value of :: indicates that an IPv6 address has not
been assigned. Although you may modify the IP address in this
window, you will typically set it using the Configuration Wizard.
S
FI0054601-00 C