Qlogic SANbox 6142 User Manual page 272

B – Log Messages
Error Log Messages
1042
1064
1067
1108
1109
1112
1282
1292
1298
1444
1688
1689
1694
2052
2053
2305
2307
2308
2309
2310
2311
2312
2313
B-16
Attempting login but Fibre Channel connection cannot be opened.
Attempting logout of device for which there is no active path (WWPN not
found).
Logout attempted using Fibre Channel VP index that has not been configured.
Operation attempted on an unconfigured VP.
Event notification: Fibre Channel processor encountered a system error
(unrecoverable firmware error).
Event notification: Fibre Channel driver encountered a fatal error.
Event notification: Fibre Channel port logged out.
Failed to allocate object for iSCSI session: out of session resources.
Received iSCSI PDU with duplicate command sequence number (CmdSN).
Command PDU will be dropped.
Unable to allocate iSCSI initiator object while instantiating session.
Failed to execute iSCSI Command PDU because its CmdSN is out-of-range.
Log message contains the incorrect CmdSN, the valid CmdSN range, the first
byte of the CDB, and the data length.
Event notification: iSCSI driver encountered a fatal error.
Event notification: an IOCTL request was received to unload the iSCSI driver.
Event notification: attempt to connect to the iSNS server failed.
iSNS connection failed.
Break up I/O DSD allocation failed.
Break up I/O recover DSD allocation failed.
Data buffer allocation failed (length %d) during tpb extension allocation.
Allocation of DSD failed during Tpb extension allocation. Buffer length %d.
FCIP incoming frame: BUGCHECK: Trb (0x%p) ValidFlag (0x%x) Direction
(0x%x).
FCIP incoming frame: GetFcipMapPortal failed.
FCIP incoming frame: Got Status aborted pTrb->pBufDescList[0]:%p Trb
Direction:0x%x.
FCIP system error.
FCIP system error: QLOP_IssuePortEnable failed.
S
FI0054601-00 C