Qlogic SANbox 6142 User Manual page 84

7 – SANsurfer iSCSI/FC Router Manager
Menu Bar
Map Local Initiator/Target Wizard – Launches the Map Local wizard,
which allows you to map a local initiator to a local target (see
Unmap Local Initiator/Target Wizard – Launches the Unmap Local wizard,
which allows you to delete a local initiator from a local target mapping (see
page
Add Remote Router Wizard – Launches the Add Remote Router wizard,
which allows you to assign local router to a remote router as peers (see
page
Remove Remote Router Wizard – Launches the Remove Remote Router
wizard, which allows you to remove a local-to-remote router peer
assignment (see
Map Remote Initiator/Target Wizard – Launches the Map Remote wizard,
which allows you to map an initiator to a target device, one of which is on a
remoter router (see
Unmap Remote Initiator/Target Wizard – Launches the Unmap Remote
wizard, which allows you to delete an initiator-to-target device mapping (see
page
Discover iSCSI Target – Launches the Discover iSCSI Target wizard, which
allows you to specify the IP address of the iSCSI Target to be discovered.
The target is added to the discovered targets list (see section
FCIP Route Add – Launches the (Fiber channel over IP) FCIP Route Add
wizard, which allows you to select – the resources used for the route, the IP
address of the remote FCIP peer, IP parameters, Virtual Lan (VLAN)
support, compression and bandwidth limit (see
FCIP Route Remove – Launches the FCIP Route Remove wizard, which
allows you to remove an existing FCIP Route, freeing the resources (FC and
GE ports) used by the route (see
7-6
7-63).
7-68).
page 7-72).
page 7-75).
7-81).
page 7-86).
page 7-92).
S
page 7-55).
page 7-84).
FI0054601-00 C