Qlogic SANbox 6142 User Manual page 275

A
329
337
513
849
859
928
933
935
937
1056
1072
FI0054601-00 C
The iSCSI processor failed the external loopback test.
The iSCSI processor command to disable a GE port failed.
The iSCSI processor could not connect with the iSCSI name server (iSNS).
The iSCSI processor reported that the iSCSI port NVRAM contains invalid
data (checksum error).
The iSCSI processor reported a link down condition.
The driver failed to receive a heartbeat from the iSCSI processor for the
specified number of seconds.
The driver timed out an iSCSI processor operation and is aborting the oper-
ation.
The driver timed out an iSCSI processor mailbox command.
The driver timed out while attempting to reconnect with the iSNS.
The driver's initiator database is full. The driver is capable of storing
1024 iSCSI initiators in its database. Use the CLI or SANsurfer Router Man-
ager to remove unwanted/unused iSCSI initiators.
The driver's target database is full. Use the CLI or SANsurfer Router Man-
ager to remove unwanted/unused iSCSI targets.
B – Log Messages
Error Log Messages
B-19