Qlogic SANbox 6142 User Manual page 104

7 – SANsurfer iSCSI/FC Router Manager
System Tree Window
NOTE:
Enable iSNS – This check box enables or disables iSNS support. Select the
check box to enable this option; clear the check box to disable it.
7-26
VLAN ID IPv6 – When VLAN IPv6 is enabled the VLAN ID IPv6
contains an identification value in the range 0 to 4094. You can
configure VLAN from this window.
Priority IPv6 – When VLAN IPv6 is enabled, this field defines the
priority assigned to this VLAN IPv6. To set the priority, open the
drop-down menu and select the desired value (between 0 to 7).
IPv6 support is available only with hardware version 6 and greater and
software version 2.4.0.0 and greater.
IP Server – This drop-down box lets you choose the IP address
version assigned to the IP server. The following examples show the IP
address fields that open when you choose one of these options.
Server IP Address – The IP address assigned to the iSNS server to
which this port will communicate. You can configure this IP address
when iSNS is enabled. Note the different formats provided for the two
different IP address version.
S
FI0054601-00 C