Qlogic SANbox 6142 User Manual page 285

A
Table B-14. Fibre Channel Driver—Fatal Log Messages (Continued)
ID
102749
102752
102755
102800
19
20
21
22
23
256
257
258
259
262
280
288
289
291
292
316
346
347
348
349
FI0054601-00 C
#%d: QLProcessResponseQueueFS: Invalid handle 0x%x, type
0x%x
#%d: QLTimer: Ext Ram parity error exceed limit cnt 0x%x, limit
0x%x, Disabled adapter
#%d: QLTimer: Heartbeat failed
#%d: QLRestartRisc: restart RISC
FC1 processor SRAM test failed.
FC1 processor power-on self-test (POST) failed.
FC2 processor SRAM test failed.
FC2 processor POST failed.
FC processor failed to return diagnostic results.
FC processor failed reset.
FC processor firmware load failed.
FC processor receive sequencer code load failed.
FC processor transmit sequencer code load failed.
FC processor firmware checksum failed.
FC processor firmware initialization failed.
FC processor paused due to internal parity error.
FC processor returned an invalid interrupt status.
FC processor invalid interrupt status.
FC processor paused due to RAM parity error.
FC processor system error.
Response queue entry contains an invalid handle.
FCIP: Response queue entry contains an invalid buffer type.
FCIP: Response queue entry contains an invalid entry type.
FCIP: Response queue entry contains an invalid handle.
Log Message
B – Log Messages
Fatal Log Messages
No.
349
352
355
400
B-29