Qlogic SANbox 6142 User Manual page 203

A
Please select a remote mapping from the list above ('q' to quit): 0
Smart-Write Compression (0=Enable, 1=Disable) [Disabled ] 1
Smart-Write Load Balance (0=Enable, 1=Disable) [Enabled ] 1
All attribute values for that have been changed will now be saved.
Remotemap modify command example without SMART-WRITE licenses:
QRouter (admin) #> remotemap mod
The following wizard will be used to modify various settings of a
remote mapping. If you wish to terminate this wizard before reaching
the end of the list press 'q' or 'Q' and the ENTER key to do so.
Index Local Device (WWPN) Remote Device (WWPN)
----- ------------------- --------------------
0 21:20:00:d0:b2:02:86:d0 21:00:00:d0:b2:00:19:f0
1 21:21:00:d0:b2:02:86:d0 21:00:00:d0:b2:00:19:f0
2 21:20:00:d0:b2:02:86:d1 21:00:00:d0:b2:00:19:f0
3 21:21:00:d0:b2:02:86:d1 21:00:00:d0:b2:00:19:f0
4 21:20:00:d0:b2:02:86:d0 21:00:00:e0:8b:08:5f:3d
Please select a remote mapping from the list above ('q' to quit): 0
The SMART-WRITE feature license in not applicable for the selected
mapping. Only mappings with the SMART-WRITE feature can be modified by
this command.
Command aborted.
Remotemap remove command example:
QRouter (admin) #> remotemap rm
The following wizard will query for attributes before persisting and
activating the updated mapping in the system configuration. If you
wish to terminate this wizard before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index Local Device (WWPN) Remote Device (WWPN)
----- ------------------- --------------------
0 21:00:00:e0:8b:08:5f:3d 22:00:00:14:c3:44:9a:fa
Please select a remote mapping from the list above ('q' to quit): 0
All attribute values for that have been changed will now be saved.
FI0054601-00 C
A – Command Reference
Commands
A-31