Qlogic SANbox 6142 User Manual page 263

A
Table B-4. User Modules—Informational Log Messages (Continued)
ID
151903
151904
151905
151906
151907
151908
151909
151910
151911
152069
152070
152071
290
291
337
338
339
340
341
344
345
346
347
FI0054601-00 C
qapimaptargettoinitiator_1_svc: Localmap added to target device
%.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x
qapiunmaptargettoinitiator_1_svc: Localmap removed for initiator
device %.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x
qapiunmaptargettoinitiator_1_svc: Localmap removed to target
device %.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x:%.2x
qapimaptargettoinitiator_1_svc: Localmap added for initiator %s
qapiunmaptargettoinitiator_1_svc: Localmap removed for initiator
%s
GE%d: Port status changed by user to ENABLED.
GE%d: Port status changed by user to DISABLED.
FC%d: Port status changed by user to ENABLED.
FC%d: Port status changed by user to DISABLED.
qapisetfcipparams_1_svc: FCIPROUTE %d Added
qapisetfcipparams_1_svc: FCIPROUTE %d Modified
qapisetfcipparams_1_svc: FCIPROUTE %d Removed
Performed router firmware upgrade, new version number is d.d.d.d.
User performed a router reboot or shutdown.
FC port configuration has been modified.
iSCSI port configuration has been modified.
iSNS configuration has been modified.
NTP configuration has been modified.
VLAN configuration has been modified.
Management ethernet port configuration has been modified.
Router configuration has been modified.
Remotemap added for local FC device WWPN xx.xx.xx.xx.xx.xx.xx.xx.
Remotemap added for remote FC device WWPN xx.xx.xx.xx.xx.xx.xx.xx.
Log Message
B – Log Messages
Informational Log Messages
No.
351
352
353
354
355
356
357
358
359
517
518
519
B-7