Qlogic SANbox 6142 User Manual page 271

A
324
393
394
548
666
669
675
676
736
740
741
757
790
808
809
811
1034
1035
FI0054601-00 C
iSCSI Login PDU was received with an invalid TSIH value. The TSIH is invalid
because there is no session with that TSIH value. This would occur if the
iSCSI initiator attempting the login failed to used the TSIH value provided in
the target login response PDU (router is target) in subsequent login PDUs.
CHAP validation failed during login.
Unexpected CHAP key.
Failed to allocate an object for Set Port Info IOCTL processing:
PortType: 0 = FC, 1 = iSCSI
PortId: 0 = FC1 or iSCSI1(GE1), 1 = FC2 or iSCSI2 (GE2)
Inquiry command failed. The Inquiry command was issued by the router as
part of its discovery process.
Pass-Through command for Inquiry command for page 83 failed. The Inquiry
command was issued by the router as part of its discovery process.
Pass-Through command for Read Capacity command failed. The Read
Capacity command was issued by the router as part of its discovery process.
Read Capacity command failed. The Read Capacity command was issued
by the router as part of its discovery process.
Pass-Through command issued by management application (such as
SANsurfer Router Manager) was aborted.
Pass-Through command issued by management application (such as
SANsurfer Router Manager) failed due to invalid CDB length.
Pass-Through command issued by management application (such as
SANsurfer Router Manager) failed due to invalid data length.
Pass-Through command issued by management application (such as
SANsurfer Router Manager) was interrupted or timed out.
IOCTL operation unsupported. Operation code provided in log message.
Report LUNs command failed. The Report LUNs command was issued by
the router as part of its discovery process.
Report LUNs command failed with check condition status. The Report LUNs
command was issued by the router as part of its discovery process.
Failed to allocate LUN object: out of resources.
Login attempted using Fibre Channel virtual port (VP) index that is
out-of-range (range = 0–31). Index reported in log message.
Login attempted using Fibre Channel VP index that has not been configured.
Operation attempted on an unconfigured VP.
B – Log Messages
Error Log Messages
B-15