Qlogic SANbox 6142 User Manual page 184

A – Command Reference
Commands
TCP Window Size (0=8KB, 1=16KB, 2=32KB)
Window Scaling (0=Enable, 1=Disable)
TCP Port No. (Min=1024, Max=65535)
GE Port Speed (0=Auto, 1=100Mb, 2=1Gb)
FCIP Time Stamp (0=Enable, 1=Disable)
Resource Allocate TimeOut (Min=1sec, Max=5sec)[1
Bandwidth, Mbit/sec (Min=1, Max=1000)
VLAN (0=Enable, 1=Disable)
FCIP SW Compression (0=Enable, 1=Disable)
All attribute values for FCIP Route 1 will now be saved.
FCIP route remove command example:
QRouter (admin) #> fciproute rm
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current
value. If you wish to terminate this process before reaching the end
of the list press 'q' or 'Q' and the ENTER key to do so.
WARNING:
The following command might cause a loss of connections to both GE
ports.
Route
-----
1
Please select a FCIP route from the list above ('q' to quit): 1
FCIP Route 1 has been removed from the system.
A-12
FC Port ID GE Port ID
---------- ----------
FC1 GE1
S
[32768 ]
[Disabled ]
[3225 ]
[Auto ]
[Enabled ]
]
[1000 ]
[Disabled ]
[Disabled ]
FI0054601-00 C