Schedule Setting; Express Setup; Holidays (And 'Others') - EverFocus PARAGON 264x1 User Manual

5.5 SCHEDULE SETTING

On the right is a screenshot of the SCHEDULE
SETTING MENU. In this menu you can set periods
during which the DVR will record the feeds of selected
cameras. These schedules will ONLY be active if the
Schedule Record box has been checked in the
Record & Play > Record submenu.

5.5.1 Express Setup

Weekend Start: Select the start moment of the period
that the DVR should classify as "weekend".
Weekend End: Select the end moment of the period
that the DVR should classify as "Weekend".
Daytime Start: Select the start moment of the period that the DVR should classify as "Weekday Daytime". (This moment
will automatically become Weekday Nighttime's end moment.)
Daytime End: Select the end moment of the period that the DVR should classify as "Weekday Daytime". (This time will
automatically become Weekday Nighttime's start moment.)
Record Type: Select the type of recording schedule for each of the time periods listed in the left-hand column. Specific
periods like Holiday and "Others" periods can be set up in the Holidays submenu .
Disabled: The DVR will not record during this period.
Event Only: The DVR will only record if a preconfigured event occurs.
Normal+Event: The DVR will record continuously and will color-code periods on the Playback Bar where event triggers
would otherwise have been the only reason why that footage was recorded.
Normal (Frame Rate): Select the FPS for Normal (continuous) recording during the scheduled period. This would be the
maximum frame rate if the DVR is not forced to automatically reduce the rate because of high FPS and resolution
requirements for a large number of channels. Selecting 0fps here would effectively shut down the Normal recording
segment of the schedule.
Event (Frame Rate): Select the FPS for Event recordings during the scheduled period. This would be the maximum frame
rate if the DVR is not forced to automatically reduce the rate because of high FPS and resolution requirements for a large
number of channels. Event recording should usually have much higher FPS settings than Normal recording, to conserve
HDD space. Selecting 0fps here would effectively shut down the Event recording segment of the schedule.
Action: Check this box to enable Buzzer, Alarm out, E-mail and Network actions selected elsewhere when a preselected
Event occurs during the selected schedule period.
Apply: Press the "Apply" button to bring up a confirmation window. Select "Yes" to confirm and apply the express schedule
settings or "No" to cancel changes.

5.5.2 Holidays (and 'Others')

In addition to setting a weekly recording schedule, the user can also create a specific recording schedule for specific days of
the year. These days can be added to the schedules on the Schedule menu page (underneath this page).
43