Sli Multi Gpu Configuration - EUROCOM Notebook V09.1.00 User Manual

SLI Multi GPU Configuration

This computer features an NVIDIA Scalable Link Interface (SLI) that improves
graphic quality and performance by combining dual NVIDIA GPUs (two video
cards are required) in a single system. To enable/disable SLI Configuration:
1. Go to NVIDIA Control Panel (see
2. Click "+" next to 3D Settings if its sub-items are not shown and then click Set SLI
Configuration.
3. Click "Enable SLI technology (recommended)".
4. Click to "Select the display to view the SLI rendered content on." (only a single
display may be used).
5. Click Apply and Yes to restart the computer (see over).
"NVIDIA Control Panel" on page B -
NVIDIA Video Driver Controls
SLI Configuration &
Multiple Displays
Note that if SLI configu-
2).
ration is enabled only a
Single display may be
used as the display de-
vice.
DO NOT use the Fn +
F7 key combination to
toggle through display
options when SLI is en-
abled. SLI supports only
a Single display, and at-
tempting to configure
dual displays may cause
an error. Use the NVID-
IA control panel to select
the display to be used.
SLI Multi GPU Configuration B - 13
B
Figure B - 9
Set SLI
Configuration