Sata Mode Selection (Advanced Menu); Legacy Usb Support: (Advanced Menu); Boot-Time Diagnostic Screen: (Advanced Menu); Power On Boot Beep (Advanced Menu) - EUROCOM Notebook V09.1.00 User Manual

SATA Mode Selection (Advanced Menu)

This menu is only available if you select the Vista O/S as your operating system.
You may enable/disable SATA RAID or AHCI mode for your hard disks, however
you should only enable/disable SATA RAID or AHCI BEFORE installing an
operating system, and after you have backed up all necessary files and data (see
sidebar).

Legacy USB Support: (Advanced Menu)

Choose "Enabled" if you intend to use USB devices in systems which do not nor-
mally support USB functionality (e.g. DOS). The default setting is "Enabled" and
does not need to be changed if you intend to use your USB devices in Windows.

Boot-time Diagnostic Screen: (Advanced Menu)

Use this menu item to enable/disable the Boot-time Diagnostic Screen.

Power On Boot Beep (Advanced Menu)

Use this menu item to enable/disable the beep as the computer starts up.

Battery Low Alarm Beep: (Advanced Menu)

Use this menu item to enable/disable the battery low alarm beep.
BIOS Utilities
SATA Mode
Selection
If you have installed the
Windows Vista operat-
ing system with either
AHCI or RAID mode en-
abled, DO NOT disable
the set mode (if you wish
to disable the set mode
you will need to reinstall
the Windows VIsta OS).
Advanced Menu 5 - 9
5