Sli Multi Gpu Configuration - EUROCOM Notebook User Manual

NVIDIA Video Driver Controls
SLI Configuration &
Multiple Displays
Note that if SLI configu-
ration is enabled only a
Single display may be
used as the display de-
vice.
DO NOT use the Fn +
F7 key combination to
toggle through display
options when SLI is en-
abled. SLI supports only
a Single display, and at-
tempting to configure
dual displays may cause
an error. Use the NVID-
IA control panel to select
B
the display to be used.
Figure B - 11
Set SLI
Configuration
B - 14 SLI Multi GPU Configuration

SLI Multi GPU Configuration

This computer features an NVIDIA Scalable Link Interface (SLI) that improves
graphic quality and performance by combining dual NVIDIA GPUs (two video
cards are required) in a single system. To enable/disable SLI Configuration:
1. Go to NVIDIA Control Panel (see page
2. Click "+" next to 3D Settings if its sub-items are not shown and then click Set SLI
and PhysX configuration.
3. Click "Enable SLI technology (recommended)" under "2.Select an SLI
configuration:".
4. Click to "Select the SLI focus display:" (only a single display may be used).
5. Click Apply and Yes to restart the computer (see over).
B - 2).
Select Yes
to restart the computer