EUROCOM Notebook V09.1.00 User Manual page 182

Troubleshooting
Problem
The TouchPad doesn't
work.
The system freezes or
the screen goes dark.
The system never goes
into a power saving
mode.
The Wireless
Bluetooth/PC Camera
modules cannot
detected.
8
The Wireless
Bluetooth/PC Camera
modules cannot
configured.
8 - 10 Problems & Possible Solutions
The Touchpad has been disabled. Press the Touchpad toggle (Fn + F1) key combination (make
sure you have installed the Touchpad driver.
The system's power saving features have timed-out. Use the AC/DC adapter, press a key on the
keyboard, or press the sleep (Fn + F4) key combination, or press the power button if no LEDs are
lit.
Power Options features are not enabled. Go to the Windows Power Options menu and enable
the features you prefer (see
enabled Hibernate mode from the control panel.
LAN/ The modules are off. Check the appropriate Touch Sensor indicator to see if the modules are on
or off (see "Touch Sensor Instant Keys" on page 1 -
be then press the appropriate touch sensor instant key/function key combination in order to enable
the modules.
LAN/ The driver(s) for the module(s) have not been installed. Make sure you have installed the driver
for the appropriate module (see the instructions in
be module).
Possible Cause - Solution
"Power-Saving States" on page 3 -
8). If the LED indicator is not illuminated,
Chapter 7 "Modules"
6). Make sure you have
for the appropriate