Sata Raid Setup Procedure (Bios) - EUROCOM Notebook V11.6.00 User Manual

Modules
7
7 - 4 Setting Up SATA RAID Mode

SATA RAID Setup Procedure (BIOS)

1. Start-up your notebook computer and press <F2> to enter the BIOS.
2. Go to the Advanced menu, select "SATA Mode Selection" and press Enter (see
page 5 - 8).
• Select "RAID".
3. Press Esc and go to the Boot menu.
4. Set the DVD-ROM Drive (make sure the Microsoft Windows 7 OS DVD is
inserted) as the first device in the boot order from the Boot menu (see
Menu" on page 5 - 15).
5. Select Exit Saving Changes from the Exit menu (or press F10 and Enter) and
press Enter to exit the BIOS and reboot the computer.
6. See the instructions in "RAID Setup (Intel Matrix)" on page 7 -
"Boot
5.