Sata Raid Or Ahci Setup Procedure (Bios) - EUROCOM Notebook User Manual

Modules
7
7 - 4 Setting Up SATA RAID or AHCI Modes

SATA RAID or AHCI Setup Procedure (BIOS)

1. Start-up your notebook computer and press <F2> to enter the BIOS.
2. Go to the Advanced menu, select "SATA Mode" and press Enter.
• For RAID Mode: - Set "SATA Mode"
page 5 - 8) to "RAID".
OR
• For AHCI Mode: - Set "SATA AHCI Enable"
Menu)" on page 5 - 8) to "AHCI".
3. Press Esc and go to the Boot menu.
4. Set the CD/DVD-ROM Drive (make sure the Microsoft Windows OS CD is
inserted) as the first device in the boot order from the Boot menu.
5. Select Exit Saving Changes from the Exit menu (or press F10 and Enter) and
press Enter to exit the BIOS and reboot the computer.
6. For RAID mode see the instructions in
7. For AHCI mode simply install the Intel Matrix driver (see
Installation" on page 7 -
("SATA Mode: (Advanced Menu)" on
("SATA Mode: (Advanced
"RAID Setup (Intel Matrix)" on page 7 -
7).
5.
"Intel Matrix Driver