EUROCOM Notebook V11.6.00 User Manual page 128

Upgrading The Computer
Figure 6 - 9
6
Secondary HDD
Assembly Removal
6 - 12 Upgrading the Hard Disk Drive(s)
5. Remove screws -
6
6. Separate the HDD
10
7. Insert the replacement HDD into the case (make sure the cable connector is
facing towards the rear of the case as illustrated below).
8. Replace screws -
6
9. Insert the HDD assembly into the bay by pushing it straight down (do not insert the
assembly at an angle) and then slide it in the direction of arrow
7
6
9
12
from the hard disk assembly.
9
from the case .
11
.
9
8
to lock in place.
12
11
10