Bluetooth Networking Setup - EUROCOM Notebook V11.6.00 User Manual

Modules
7
Figure 7 - 29
Network Settings
7 - 50 Bluetooth Module

Bluetooth Networking Setup

This information applies to the combo Bluetooth and WLAN module only.
1. Make sure the Bluetooth module is powered on.
2. Double-click the My Bluetooth application on the desktop (or access it from the
Programs/All Programs menu).
3. Click My Bluetooth Settings (see
4. Click Network Settings (make sure the Bluetooth module is powered on.
5. Click Enable Bluetooth Network and click OK.
6. A message will appear in the notification area to confirm that the network driver
has been installed.
Figure 7 - 26 on page 7 - 47).