Sata Raid Setup Procedure (Bios) - EUROCOM Notebook V12.1.00 User Manual

SATA RAID Setup Procedure (BIOS)

1. Start-up your notebook computer and press <F2> to enter the BIOS.
2. Go to the Advanced menu, select "SATA Mode" and press Enter (see page
• Select "RAID Mode".
3. Press Esc and go to the Boot menu.
4. Set the DVD-ROM Drive (make sure the Microsoft Windows 7 OS DVD is
inserted) as the first device in the boot order from the Boot menu (see
Menu" on page 5 - 13).
5. Select Save Changes and Exit from the Exit menu (or press F4 and Enter) and
press Enter to exit the BIOS and reboot the computer.
6. See the instructions in "RAID Setup (Intel Matrix)" on page 7 -
5 - 9).
"Boot
6.
Setting Up SATA RAID or AHCI Mode 7 - 5
Modules
7