Pc Camera Module - EUROCOM Notebook V11.6.00 User Manual

PC Camera Module

Before installing the driver, make sure the PC Camera is on. Use the Fn + F10 key
combination or Touch Sensor Instant Key to toggle power to the to the PC Camera
module. When the PC Camera module is powered on, the touch sensor LED will be
highlighted and the indicator
the drivers in the order indicated in
There are a number of different camera modules available with this computer model
series. You will have the appropriate application installed for your camera (note that
some versions of the camera application do not support the zoom function). Make
sure you access the application via the desktop shortcut.
PC Camera Application and Power-Saving States
If the computer enters Sleep or Hibernate mode while running the camera application, the
program will stop running, and will need to be restarted when the system resumes from the
power-saving state.
will briefly be displayed. Make sure you install
Table 4 - 1, on page 4 - 3.

Modules

Latest PC Camera
Driver Information
Check the Device Drivers
& Utilities + User's Manu-
al disc and any accompa-
nying insert pages, for the
latest updated information
on the PC Camera driver,
which may override the in-
formation provided here.
PC Camera Display
The PC Camera applica-
tion software needs to be
run while the default note-
book LCD is the selected
display device.
After a camera picture is
obtained on the default
notebook LCD, you may
then use the Fn + F7 to tog-
gle through the display
modes (give the screen
time to refresh).
PC Camera Module 7 - 33
7