Wireless Lan Module - EUROCOM Notebook V11.6.00 User Manual

Wireless LAN Module

If you have included an Intel® Wireless LAN module or 3rd Party 802.11b/g/n
WLAN module in your purchase option, make sure that the Wireless LAN module
is on before installing the driver.
Use the Fn + F11 key combination or Touch Sensor Instant Key to toggle power
to the Wireless LAN module. When the WLAN module is powered on, the touch sen-
sor LED will be highlighted and the indicator
Make sure you install the drivers in the order indicated in
The operating system is the default setting for Wireless LAN control in Windows 7.
Note that you need to install both the WLAN & Bluetooth drivers for the WLAN & Blue-
tooth Combo module.
will briefly be displayed.
Table 4 - 1, on page 4 - 3.
Wireless LAN Module 7 - 15
Modules

Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F11 key com-
bination/Touch Sensor In-
stant key to toggle power to
the WLAN module, and
check the LED to see if the
module is powered on or
not (see Table 1 - 4, on
page 1 - 10/ Table 1 - 3, on
page 1 - 8).
7